| |
 |
- Fresh stucco surfaces should be cured
for 30 days prior to painting.
- If efflorescence is present, remove by
hand wire brushing; wear eye protection and gloves; try to
identify and eliminate any source of water from behind the
stucco that could have caused the efflorescence
Scrape out and widen any cracks; brush out dust, and seal
with 100% acrylic or siliconized acrylic caulk; make second
application in several hours if needed
- Treat any mildew with a 3:1 water:household
bleach mixture, leaving it on for 20 minutes and adding more
as it dries; wear eye and skin protection; rinse thoroughly
- Remove dirt, chalk, dust, unbound sand,
treated mildew, etc. by scrubbing with detergent and water,
and rinse thoroughly; or power wash with plain water, taking
care to not drive water into cracks or porous areas.
Return
to Main Page
|
|
 |
